GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 56 / 415

Suite Preferences
About Show Files
58
be affected, other aspects of system operation (source mapping, source name displays,
available effects, etc.) will change depending on what files are being loaded.
Note: Verify that the Show includes/excludes the desired preferences
and settings before loading, especially if the system is currently on-air.
• Choose Load : brings up a pane that allows you to see what files are contained in the
Show, and select which preferences and settings to load. Buttons for switcher areas not
present are grayed out. By default all the switcher area preferences and settings saved
as part of the show are selected for load.
• Specify the preferences, settings, and register ranges, then select the Load button.
• Clear and Replace : removes and all preferences, settings, and ranges so you can limit
what is loaded into the Show file so it is not a cumulative load/overwrite.
•
Select All
: (toggle) button selects or deselects all the available preferences and settings.
• Create : saves the show into the currently selected directory. A pop-up panel displays
the status of each preference and setting as the Show file is created.
• Update Show : brings up a pane that allows you to select specific preferences and
settings within a show to update and specify each and enter register ranges where
applicable. Selecting the Update button completes the operation.
Note: A best practice is to set register ranges to all each time there is an
update (e.g. E-MEM 0-999, Macro 1-999, etc.), this will ensure that new
registers are included.