GRASS VALLEY GV KORONA Скачать руководство пользователя страница 294

Страница: 294 / 415

Advanced Operations

Insert External Device Control Commands in Macros

298

Note:

Selecting or re-selecting any Keyer Mode button (Fixed Linear, Adj

Linear, or Luma Key) will reset the shape type to “Auto”, as defined in the

Source Definition menu.

Select the desired Key.

In the Keyer Mode pane, select the

Fixed Linear

Adj Linear

, or

Luma Key

buttons if not

already selected.

Select the

Additive Key

button to turn it to On (illuminates green).

Turn off the

Additive Key

button.

The key will remain in the selected On/Off state.

About Super Additive

“Super Additive” mode replaces the key signal of the selected source with a full field of

black, while in the additive key mode. The opacity of the fine and semi-transparent video is

greatly increased based on its luminance. This is very much a “fashion-statement” kind of

keying which has been very popular with entertainment shows. Additionally, Super

Additive mode is very useful for keying over credits and other text because it brightens and

increases transparency.
When Additive Key mode is On, the Super Add button is displayed and defaults to Off.

Select the Super Add button to turn it On/Off.

The Super Add button is also returned to “Auto” state by selecting or re-selecting a Keyer

Mode button.

Содержание GV KORONA
































































































































































































































































































































































































































Результаты поиска

Содержание GV KORONA

Отзывы:

GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 294 / 415

Результаты поиска

Содержание GV KORONA

Отзывы: