manualshive.com logo in svg

GRAPHTEC SignJet JS310-25ES, Руководство по обслуживанию, Страница: 92 / 141

Поделиться
Скачать
GRAPHTEC SignJet JS310-25ES Скачать руководство пользователя страница 92

8. Print Head Adjustment Procedures

85

JS310-UM-251-9370

(3)  Select an adjustment pattern and print it.

(a) On the menu bar, click 

File

 -> 

Open

.

(b) Open the file “

C: /Try/SmallGrid126.group

”

(c) Click the   button on the tool bar to print the selected pattern.

 

(d) Only cyan will be printed.

(4)  Use the Try utility to adjust the spacing between each printed bands.

(a) Use the Try utility to adjust the bi-directional printing band.
(b) Click the “More” button from the Print Setup menu to display the Important Setup menu.

 

(c) The “Warning: Change these parameters carefully!” message is displayed. Click “Yes”.
(d) Perform adjustments accordingly while viewing the printed results.

 

+

-

Printing direction

Printed from the right.

Printed from the left. 
(Return pass)

Содержание SignJet JS310-25ES














































































































































Отзывы:

Нет отзывов