GRAPHTEC SignJet JS310-25ES Скачать руководство пользователя страница 54

Страница: 54 / 141

6. Initial Ink Induction Procedure

JS310-UM-251-9370

6.4 Mounting the Print heads

• If the print head carriage is not at the cleaning position, move it to the cleaning position.

Moving the print head carriage to the cleaning position

(a) From the main menu, select [

Cleaning Tool

] and then press the

ENTER

key.

(b) From the submenu, select [

Clean Post

] and then press the

ENTER

key.

(1) Turn off the printer power supply.

Turn off the printer power supply before mounting the print heads.

• Performing the print head mounting operation while the power supply is on may result in damage to the

printer or to the print heads. Make sure that the power supply is turned off.

(2) Mount the print heads in order from the left-hand side.

Mount the print heads in the order shown below, starting from the left-hand side. The procedure described
below is the procedure for mounting one print head. Repeat the procedure of step from (3) to (10) for all eight
print heads.

Print head mounting order

Содержание SignJet JS310-25ES














































































































































Результаты поиска

Содержание SignJet JS310-25ES

Отзывы:

GRAPHTEC SignJet JS310-25ES, Руководство по обслуживанию, Страница: 54 / 141

Результаты поиска

Содержание SignJet JS310-25ES

Отзывы: