GRAPHTEC SignJet JS310-25ES, Руководство по обслуживанию, Страница: 58 / 141

6. Initial Ink Induction Procedure
51 JS310-UM-251-9370
6.5 Initial Print head Cleaning Procedure
A new print head contains a protecting liquid. Before using the print head, follow the procedure described below to
clean the print head.
(1) Pour cleaning solution into the solution tank.
Pour a generous amount of cleaning solution into the solution tank.
Solution tank:
Pour a generous amount of cleaning solution
into the tank, up to the level indicated by the
white line.
(2) Turn on the printer power supply.
When the power is turned on, the printer begins a self-test operation (the print head carriage and the feed
rollers move). When the self test has been completed, wait until the main menu is displayed on the LCD.
• Since ink has not yet been supplied to the printer, a “ No Ink ” alarm will sound after several minutes have
elapsed. This alarm does not indicate a malfunction, and no action is required.
(3) Move the print head carriage to the cleaning position.
(a) From the main menu, select [ Cleaning Tool ] and then press the ENTER key.
(b) From the submenu, select [ Clean Post ] and then press the ENTER key.
The print head carriage moves to the cleaning position and then stops.
(4) Check that the 3-way valve for the solution tank is set to the supply position.
• If the lever is at a different position, move it to the supply position.
Solution tank 3-way valve
Turn to the supply position