GRAPHTEC SignJet JS310-25ES Скачать руководство пользователя страница 50

Страница: 50 / 141

6. Initial Ink Induction Procedure

JS310-UM-251-9370

Empty out the cleaning solution from the sub tanks

CAUTION:

First of all, remove the waste ink tanks mounted in the printer, and then discard the cleaning solution
from the sub tanks into the waste ink tanks.

(30) Remove the cap from each sub tank.

If the cap is difﬁcult to remove, use pliers or similar to grip the cap and open it.

Pliers

CAUTION:

When opening the cap, be sure to grasp
the upper corners of the tank.

(31) Empty out the cleaning solution from each sub tank.

Tilt the sub tank, and then pour the cleaning
solution into the waste ink tank positioned
underneath it.

(32) Reattach the cap on each of the sub tanks, and then leave them to dry out for at least 10 minutes.

Содержание SignJet JS310-25ES














































































































































Результаты поиска

Содержание SignJet JS310-25ES

Отзывы:

GRAPHTEC SignJet JS310-25ES, Руководство по обслуживанию, Страница: 50 / 141

Результаты поиска

Содержание SignJet JS310-25ES

Отзывы: