grandimpianti BTEL15*N4065, Руководство по программированию

Страница: 8 / 56

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 801293
6
MDC Identification
SELECT CYCLE Keypads
SELECT CYCLE keypads are used to select the
specific washer cycle. These keypads include
NORMAL 90, NORMAL 60, NORMAL 40, PERM
PRESS 60, and DELICATES 30
.
The selection of one
of these keypads will light up the corresponding LED.
The SELECT CYCLE keypads are not active after the
first fill cycle of the washer. Pressing the flashing
START keypad will confirm selection and cycle will
begin when vend is satisfied.
NOTE: The number on each keypad corresponds
to the wash temperature in °C.
PREWASH Keypad
The PREWASH keypad is used to add a prewash
setting to any select cycle. The PREWASH keypad
must be pressed when the control is in the Start Mode.
The PREWASH LED will light when PREWASH is
active.
START Keypad
The START keypad is used to start the washer after the
full vend price has been satisfied.
The SELECT CYCLE, PREWASH, and START
keypads are used in various combinations for
programming cycles, retrieving audit information,
running diagnostic tests, and other operations
described in
Entering Manual Mode .
NORMAL 90
NORMAL 60
NORMAL 40
PERM PRESS 60
DELICATES 30
FLW1946N
90
FLW1947N
60
FLW1948N
40
FLW1949N
60
FLW1950N
30
PREWASH
START
FLW13R
FLW14R