grandimpianti BTEL15*N4065, Руководство по программированию

Страница: 42 / 56

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming MDC
801293
40
27. DELICATES 30 Rinse Fill/Agitate Time
“-027”
This option allows the owner to set the amount of rinse
fill/agitate time for the DELICATES 30 cycle.
How to Program DELICATES 30 Rinse
Fill/Agitate Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode .
2. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad until “PrOg” appears in the Four-
Digit Display.
Figure 61
3. Press the START (enter) keypad and “-001” will
appear in the Four-Digit Display.
4. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad to scroll through the programmable
options until “-027” appears in the Four-Digit
Display.
Figure 62
5. When “-027” appears in the Four-Digit Display,
press the START (enter) keypad. The current
number of minutes set for DELICATES 30 Rinse
Fill/Agitate Time will appear in the Four-Digit
Display.
6. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad to increase or decrease the current
number of minutes displayed in the Four-Digit
Display to the desired number of minutes.
NOTE: DELICATES 30 Rinse Fill/Agitate Time
can be set from zero (0) to 15 minutes. If time is set
to zero, DELICATES 30 Rinse cycle will be
skipped.
7. Press the START (enter) keypad when the correct
number of minutes appears in the Four-Digit
Display. The next option, “-028”, will appear in
the Four-Digit Display.
NOTE: To program “-028” (DELICATES 30 Extra
Rinse Fill/Agitate Time), refer to option 28. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
1. Be sure the control shows a programmable
option, not a value.
2. While pressing and holding the NORMAL 90
keypad with one hand, press the NORMAL 60
keypad with the other hand. The control will
revert back to the previous mode of operation.
COM1R
COM32R