grandimpianti BTEL15*N4065, Руководство по программированию

Страница: 49 / 56

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 47
801293
Collecting Audit Information
This feature allows the owner to retrieve audit
information stored in the washer by pressing a
sequence of keypads on the control. For an explanation
of the audit options available, refer to
Table 3 .
How to Enter Audit Feature
There are two methods the owner can use to enter the
audit feature.
Entering the Audit Feature by Manual
Mode
1. Control must be in the Manual Mode to start.
Refer to Entering the Manual Mode .
2. Press the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad until “AUdt” appears in the Four-
Digit Display.
Figure 71
3. Press the START (enter) keypad. “C1” will
appear in the Four-Digit Display.
Entering the Audit Feature with the Coin
Vault Open
1. Open coin vault.
NOTE: The service door must be closed on
machines with controls that have software version
“S003” or higher.
2. Press START (enter) keypad.
How to Read Audit Data
1. Use the DELICATES 30 (
∧
) or the PREWASH
(
∨
) keypad to scroll through various options until
the desired option is displayed in the Four-Digit
Display. Refer to the Audit Options List for an
explanation of the audit options available.
Table 3
2. Once the desired option appears in the Four-Digit
Display, press the START (enter) keypad to start
the audit count. At this point, the display will
show the four-digit audit value.
3. Press the START (enter) keypad again. The
control will go to the next audit option in the
Audit Options List.
4. To select other audit options, repeat steps 1 – 3.
How to Exit Audit Feature When
Using Manual Mode
1. Be sure the control shows an audit option, not a
value.
2. While pressing and holding the NORMAL 90
keypad with one hand, press the NORMAL 60
keypad with the other hand. The control will
return to the previous mode of operation.
NOTE: To exit Audit Feature when using Coin
Vault Open method, owner must close coin vault.
COM2R
Audit Options List
Four-Digit
Display
Description
C1 Total Number of Coins #1
C2 Total Number of Coins #2
CyC Total Number of Machine Cycles
SP Total Number of Start Pulses