grandimpianti BTEL15*N4065, Руководство по программированию

Страница: 51 / 56

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Testing Machine and MDC Functions
49
801293
Diagnostic Test Descriptions
Show Fill Time Test
This test will display the average fill time. The average
will be calculated by taking the average of the last four
fill times.
To start test, control must be in the Testing Mode.
Refer to
How to Start Tests at the beginning of this
section.
To enter, press the START (enter) keypad. The Four-
Digit Display will show “FXXX”. The “XXX” will be
the average fill time in minutes and seconds for that
machine.
To exit the Show Fill Time Test, press and hold the
NORMAL 90 keypad with one hand, then press the
NORMAL 60 keypad with the other hand. The control
will return to the previous mode of operation. Refer to
Figure 2 .
Show Drain Time Test
This test will display the average drain time. The
average will be calculated by taking the average of the
last four drain times.
To start test, control must be in the Testing Mode.
Refer to
How to Start Tests at the beginning of this
section.
To enter, press the START (enter) keypad. The Four-
Digit Display will show “dXXX”. The “XXX” will be
the average drain time in minutes and seconds for that
machine.
To exit the Show Drain Time Test, press and hold the
NORMAL 90 keypad with one hand, then press the
NORMAL 60 keypad with the other hand. The control
will return to the previous mode of operation. Refer to
Figure 2 .
Temperature Sensor Display Test
This test will display the temperature sensed at the
temperature sensor in degrees Celsius. If the control
senses a shorted sensor, it will display “SH”. If the
control senses an open sensor, it will display “OP”.
To start test, control must be in the Testing Mode.
Refer to
How to Start Tests at the beginning of this
section.
To enter, press the START (enter) keypad. The Four-
Digit Display will show “CXXX”. The “XXX” will be
degrees Celsius.
To exit the Temperature Sensor Display Test, press and
hold the NORMAL 90 keypad with one hand, then
press the NORMAL 60 keypad with the other hand.
The control will return to the previous mode of
operation. Refer to
Figure 2 .