Granby KLF-100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 27 / 40

27
CHANGING NOZZLE
It is recommended that the nozzle be replaced once a year. If a new nozzle of a different size is
installed, change the blower speed according to section
BURNER INSTALLATION AND
SPECIFICATIONS or operating decal as required.
AIR FILTERS
To maintain furnace performance and safety, replace dirty filters at least once every heating
season or as required. Use new approved disposable filters of the same size and type. Dirty,
clogged or wrong sized filters will impair the furnace performance and may cause the furnace to
shut down or overheat.
KLR KLF
6) Slide the blower toward you and then lift the blower straight up. Shift the blower out of the
furnace.
KLR KLF
Put back the blower assembly using the reverse procedure. Ensure wiring and ground wires are
correctly reconnected.
Nuts
Nuts