SETUP INSTRUCTIONS
1. Lock head and foot end casters parallel to
frame and oriented as shown at right.
2. Move bed into position as shown at right and
hook the foot end frame over the round bar
on the head end frame.
3. Swing the lift handle out and slowly lower the
bed. Keep both hands on handgrips until the
bed has been completely lowered to reduce
the risk from pinch areas.
4. Insert quick release pins on both sides of
frame.
5. Connect both actuator cables from foot end
of frame to head end of frame.
Step 1
Step 2
Step 4
Step 5
GD_3648-INS-LAB-RevA20 11
