FUNCTION AND BASIC OPERATION
ACTUATORS, CONTROL MODULE, AND HANDSET
Bottom View of Bed
Mounting Bracket
Actuator
Green Power-on Light
Glows when Power Cord
Is plugged into 120V outlet
Control Module Wiring Diagram
Control Module
Cover
Release
Power Cord w/
Green Ground Wire
Linear Actuators
The bed is equipped with 24V DC Linear
Actuators designed with built in travel limit
switches. Each actuator is equipped with
quick release pivot pins (
3
/
8
" x 2") on both
ends. If disassembled retain pivot pins and
hairpin clip.
Control Module
The Control Module is designed to control all
actuators in the system. The Control Module
mounts directly on one of the actuators as
shown.
Handset
The Handset is used to control all actuator
functions. When not in use, the Handset
hooks on the top of the side rail. See Handset
Operation on following page.
Ground Wire
Green wire from power cord connects to bed
frame. Secure with screw and star washer.
WARNING:
Before removing
connectors from control module for
any reason, disconnect the power cord.
Ensure all connectors are securely
plugged in before closing cover on
control module when finished.
GD_3648-INS-LAB-RevA20 14
