Gradall D152, Руководство по безопасности оператора

Страница: 53 / 98

Section 3 - Operation
3-3 82104002
3.2 CHECKS BEFORE REMOTE CONTROL OPERATION
This section outlines the checks to be performed at the beginning of each work shift
or at each change of operator. Repair any deficiencies before driving or operating
the equipment. During warm-up period, check the following:
• Make sure the engine does not start with the control cut out lever in the lowered
position.
• Check to ensure the engine functions properly and the lights and indicators
located in the upperstructure cab are functioning.
• Check to ensure control pattern decal matches joystick control pattern shown on
the LCD display.
• Ensure digging brakes and park brake function properly before traveling a
significant distance in remote control.
• Be sure travel alarm and horn function properly. Both must be audible from the
cab with engine running.
• Make sure all boom and attachment functions operate smoothly and correctly.
• Forward/reverse travel and steering operate correctly.
• Swing the upperstructure left and right and ensure the swing brake functions
properly.
Normal Engine Operation
• Observe gauges frequently to be sure all engine systems are functioning
properly.
• Be alert for unusual noises or vibration. When an unusual condition is
noticed, park machine in a safe position and perform shut-down procedure. See
“Remote Mode Engine Shutdown” on page 3-21. Report condition to your
supervisor or maintenance personnel.
• Avoid prolonged idling. If the engine is not being used, turn it off.