Gradall D152 Скачать руководство пользователя страница 27

Страница: 27 / 98

Section 2 - Pre-Operation and Controls

2-3

82104002

4. Fuel Tank - Check fuel level, refill as required; filler cap securely fastened.

5. DEF (Diesel Exhaust Fluid) Tank - Check DEF level, refill as required.

6. Battery Box - Battery cables tight, no visible damage or corrosion. Battery box

cover properly latched.

7. Upperstructure Cab -

• General appearance; no visible damage; Operator & Safety manual located

in manual drawer.

• Grab handles and steps secure and clean.

• Window glass and mirrors clean and unobstructed. Adjust mirrors for

maximum visibility, before and during operation. Be sure windows and doors
securely latch in open and closed position. Replace damaged latches
immediately.

• Check seat belt (if equipped) for damage, replace belt if frayed or cut

webbing, damaged buckles or loose mounting hardware.

8. AC/Heater Cover - Ensure cover is securely latched. Replace damaged latches

immediately.

9. Rear Axle/Fender - Check mud flaps for proper position and condition for

highway operation; brakes undamaged.

10. Wheel/Tire Assemblies - No loose or missing lug nuts; proper inflation; No

damage to rims or tires; axle bolts torqued.

11. Rear Axle/Fender - Check mud flaps for proper position and condition for

highway operation; brakes undamaged.

12. Main Control Valve and Cover - See Inspection Note. Ensure cover is securely

latched. Replace damaged latches immediately.

13. Center Pin - See Inspection Note.

14. Tilt Gear - Properly lubricated.

15. Air Tanks - Check for damage/leaks; open petcocks to eliminate condensation.

16. Boom -

• Rollers properly adjusted; no visible damage to boom hoses/tubes

• Boom secure if machine is to be driven on highway.

17. Hydraulic Reservoir - Recommended fluid level on sight gauge; filler/breather

cap secure and working; oil is clear.

18. Attachment - Properly installed.

Содержание D152



































































































Результаты поиска

Содержание D152

Отзывы:

Похожие инструкции для D152

Бренды по названию

Популярные бренды

Gradall D152, Руководство по безопасности оператора

Результаты поиска

Содержание D152

Отзывы:

Похожие инструкции для D152

Бренды по названию

Популярные бренды