manualshive.com logo in svg

Gradall D152, Руководство по безопасности оператора, Страница: 19 / 98

Поделиться
Скачать
Gradall D152 Скачать руководство пользователя страница 19

Section 1 - General Safety Practices

1-9

82104002

Tip Over Hazard

• Understand how to properly use the capacity chart located in cab. Do not

exceed rated lift capacity. Plan the lift to be sure it can be performed safely.

• Maintain proper tire pressure at all times.

• Do not depend on machine tipping as a warning of overload. Some load ratings

are based on hydraulic lift capacity, not stability.

• Do not increase hydraulic relief settings to lift a load. 

• Sudden swing braking can cause unexpected movement of the load and tip the

machine.

• Tether suspended loads to restrict movement.

• Never pass load line over open bucket. Relief valves in bucket circuit could

cause unexpected, dangerous movement of the load. Bucket linkage could also
be damaged.

• Be sure the surface excavator is on is firm enough to support unit and allows for

adequate traction.

• Select low travel speed for off-highway grade travel. See “LCD Display” on

page 2-8.

• Do not travel over excessively steep slopes or excessively rough terrain.

• No load in bucket, attached to boom or any other part of machine during off-

highway grade travel.

• Front axle lock cylinders automatically unlock during travel. Do not travel with

load over side.

• Shutting off engine will cause front axle lock cylinders to unlock. Place load on

ground before shutting off engine.

OAC0670

Содержание D152



































































































Отзывы:

Нет отзывов