Gradall D152, Руководство по безопасности оператора

Страница: 33 / 98

Section 2 - Pre-Operation and Controls
2-9 82104002
1. Mode Select: Press this button to toggle between fine grade mode (1-a) and dig
mode (1-b).
2. Hourmeter: Press this button to view the hourmeter information window (2-a).
Hourmeter information is separated into chassis engine hours and
upperstructure hours. The window will close after a brief period of time, or press
the button again (2) to close the window manually.
3. Joystick Control Pattern Selection: Press this button to view available control
patterns. Scroll the control patterns by rotating the control panel dial (4). When
desired control pattern is displayed, press the Joystick Control Pattern
Selection button (3) to confirm selection. If a new pattern is selected, controls
will not change until the next power cycle.
Available control patterns are Gradall (3-a), SAE (3-b) and John Deere (3-c).
See “Joystick Controls” on page 2-19 for control details.
Note: When a control pattern is changed, the corresponding control decal must be
displayed in the cab.
4. Auxiliary Hydraulics Control: See page 2-14 for details.
OAC2121
Will not change until
next power cycle.
Will not change until
next power cycle.
JOHN DEERE
Will not change until
next power cycle.
SAE
5.00H
5.00H
+
1 4
1-a
1-b
2
2-a 3-a
3-b
3-c
3
4
AUX