Graco XM PFP 273231, Руководство по ремонту и запасным частям

Страница: 13 / 68

Repair
3A8047B 13
Repair
NOTE: For detailed repair information for your ram
assembly, see your Supply Systems repair and parts
manual.
Follow Pressure Relief Procedure on page 9 if service
time may exceed pot life time, before servicing fluid
components, and before transporting sprayer.
Replace Air Filter Element
There are two air filters on all systems: the inlet air
regulator filter on the air controls and the main air inlet
manifold filter. Check filters weekly and replace element
as needed.
Control Air Regulator Filter
1. Close main air shutoff valve on air supply line and
the main air shutoff valve (E).
2. Remove four nuts (21) and then remove front and
rear shrouds (19, 20).
3. Unscrew filter bowl from inlet air regulator (601d).
4. Remove and replace element.
5. Screw filter bowl on securely.
6. Replace front and rear shrouds (19, 20) using four
nuts (21).
Main Air Inlet Manifold Filter
1. Close the main air shutoff valve on the air supply
line and the main air shutoff valve (E).
2. Unscrew filter bowl collar from main air inlet
filter (14).
3. Remove and replace filter element (701a). See Air
Filter (24P899) , page 55.
4. Reassemble filter bowl.
To reduce the risk of serious injury, do not service air
filter until air line is depressurized. Removing a
pressurized air filter bowl could cause serious injury.
E
21
20
19
Filter Bowl
and Element
644a
14
ti199526a1