Graco XM PFP 273231 Скачать руководство пользователя страница 17

Страница: 17 / 68

Repair

3A8047B

6. Remove front display panel (504d) and

gasket (504g).

7. Discard old display assembly.

8. Place new front display panel (504d) and

gasket (504g) on front panel of control box (16).

NOTE:

To ease installation use clear tape to hold front

display panel in place.

9. Carefully connect display cables and key switch

cable to new circuit board.

10. Install new rear display panel (504c) and secure

with four screws (504f). Ensure key switch cable

protrudes from opening in top of display module.

11. Install access cover and screws.

12. Reconnect CAN cable to display module.

13. Reconnect power.

14. Load software. See

Upgrade Software

, page 17.

15. Replace shroud.

16. Configure system settings as they were set on old

display. See XM PFP Operation manual for

instructions.

Replace Front Panel

See

Replace Display

, page 16, for instructions.

Upgrade Software

1. Download all USB logs. The new software will erase

the USB logs. See operation manual for

instructions to Download Data from USB.

2. Turn off power to the system.

Remove Shroud and Front Panel of Control Box

see page 14.

4. Remove four screws (504f) then remove access

cover (504e).

5. Insert and press token (506) firmly into slot.

NOTE:

There is no preferred orientation of token.

6. Turn power on.

7. The red indicator light (L) will flash until new

software is loaded on the display module.

8. All system modules will be automatically updated.

See Graco Control Architecture Module

Programming manual for details.

9. Remove token.

10. Reinstall shrouds and front panel.

504b

504c

504g

504d

Display Cable

539

506

504f

504e

Battery

r_xm1a00_312359_313289_2a

Содержание XM PFP 273231





































































Результаты поиска

Содержание XM PFP 273231

Отзывы:

Похожие инструкции для XM PFP 273231

Бренды по названию

Популярные бренды

Graco XM PFP 273231, Руководство по ремонту и запасным частям

Результаты поиска

Содержание XM PFP 273231

Отзывы:

Похожие инструкции для XM PFP 273231

Бренды по названию

Популярные бренды