Model and Component Identification
22
334513N
For ATEX DC (models CI-24X)
The pump assembly has terminals housed inside the
back cover plate of the motor. See F
1. Remove the rear cover plate of the motor.
2. Connect wires and related conduit (user-supplied)
rated per local electrical code. See F
IG
. 12 for wiring
diagrams, and
Technical Specifications
, on page
58, for current ratings.
3. Replace the motor junction box.
4. Connect a user-supplied ground wire to the ground
stud on the opposite side of the motor from the
motor wire exit.
Second Pump Add-On
1. Follow
, page 23.
2. Remove the drive guard (60).
3. Remove the plug (107) on the side of the housing
(2) opposite of the existing pump.
4. Remove the two shoulder screws (17), and then
remove the plunger return block (16).
5. Follow
(steps 8-11), page 33.
6. Replace drive guard (60).
F
IG
. 13 Electrical connections for Single Phase DC
Pumps
BLACK
BLACK
LINE 1*
LINE 2*
MOTOR
F
IG
. 14
2
17 16
107
60
