Graco LSR Select, Инструкция по эксплуатации

Страница: 89 / 112

Appendix A - HMI Screens Overview
3A2152B 89
The Status screen pictorially represents the system and status of each item.
1. Base pump on left of screen:
a. Far left valve indicator shows if the base inlet
valve is in the opened or closed position.
b. Right valve indicator shows if the base outlet
valve is in the opened or closed position.
c. A pressure indicator shows the pressure of the
base pump when loading or dispensing.
d. The box under the pressure indicator shows the
drive status. This is the same status box that
shows on startup screen.
2. The valve stack on the right of the screen.
This shows various assemblies depending on what has
been installed on the system.
a. If the pressure is displayed, the screen shows
the material feed pressure on the valve when
the valve is in the load position and the pressure
of the material when being injected into the
stack when the valve is dispensing.
b. The box above the pressure reading indicated
the drive status. This is the same status box that
shows up on the startup screen.
Assembly
In
hib
it
o
r
Ca
ta
ly
st
Co
lo
r
Pres
sure
24M093
 
24M126
  
24M127
  
24M128
   