Graco LSR Select, Инструкция по эксплуатации

Страница: 100 / 112

Appendix A - HMI Screens Overview
100 3A2152B
BASE/CATALYST/INHIBITOR/COLOR LOG screens:
These are accessible from the PRESSURE LOG SCREEN.
These screens are identical for each component; the
base component is shown below as an example.
1. CLEAR DRIVE FAULT Push button: Clears faults
on all drives. The button has the identical function to
the CLEAR DRIVE FAULT push button on
DRIVE/VALVE control screen.
2. ENABLE/DISABLE DRIVE Push buttons and Indi-
cator: These enable or disable the drive. They
have the identical function as the ENABLE/DIS-
ABLE DRIVE push buttons on the DRIVE/VALVE
SCREEN.
3. HOME PUMP/CYCLE PUMP Push buttons and
indicator: These buttons home or cycle the pump.
The function is identical to the HOME
PUMP/CYCLE PUMP push buttons on the
DRIVE/VALVE screen.
4. DATA LOG CONTROLS Window: The push buttons
in this window work the same as they do in the
PRESSURE LOG screen.
5. PRESSURE (psi) Readout: This shows the actual
pressure valve of the component.
NOTE: This may not show if the option (24M127,
24M128) is not being used.
6. TORQUE (%) Readout: This displays the percent-
age of full torque the motor is using.
NOTE: The torque value may read a negative value.
The negative sign indicates the direction the motor is
turning.
7. SPEED (RPS) Readout: This displays the actual
speed of the motor in revolutions per second.
NOTE: The speed value may read a negative value.
The negative sign indicates the direction the motor is
turning.