Graco GH 24X011, Инструкция - Каталог запасных частей

Страница: 21 / 40

Belt Removal and Installation
334194A 21
Belt Removal and Installation
1. Perform
Pressure Relief Procedure
, page 10.
Removing Belt
a. Loosen engine bolts (21) to relieve tension on
belt.
b. Slide belt off pulleys.
Installing Belt
a. Install belt (19) over small (6) and large (4)
pulleys.
b. Tighten engine bolts (21). Torque to 225 + 10
in-lb (25.4 + 1.1 N•m).
c. Check belt (19) alignment on both large (4) and
small pulley (6). When properly positioned over
pulleys, belt should be centered on pulleys and
completely over all grooves.
NOTE:
If belt is not aligned properly, to adjust belt, slowly
pull engine recoil while at the same time pushing or pull-
ing belt to reposition over pulley.
Properly Aligned
Not Aligned Properly
ti7834a
ti7837a
4
6
19
21
ti20943a