Graco GH 24X011, Инструкция - Каталог запасных частей

Страница: 16 / 40

Compensator Seal Replacement
16 334194A
Compensator Seal
Replacement
Removal
1. Perform
Pressure Relief Procedure
, page 10.
2. Remove screw (197) and pump handle cover (196).
Remove four cover bolts (79) and cover (140).
NOTE:
It is not necessary to remove the hydraulic
lines before removing the cover. The cover is
designed to provide ample room for the cover to fit
over the hose.
3. Remove compensator screws and separate com-
pensator and adapter block.
4. Install new gaskets and torque screws.
5. Install cover (140) with four screws (79). Torque to
25-30 in-lb (2.8 - 3.4 N
z
m). Install pump handle
cover (196) with screw (197).
Allow hydraulic system to cool before beginning the
service procedure to prevent injury.
ti7805c
140
79
196
197
Torque 50 in-lb
4 plcs
Adapter
Block
O-Ring
Gasket
O-Ring
Lubricate before installation
ti17601a
Gasket
Note Gasket Orientation
Compensator
Assembly
Torque 50 in-lb
4 plcs
1
4
3
2
Torque sequence: 1-2-3-4-1
All cap screws must be tightened
When compensator assembled to
Gasket Adaptor Block. Do not
pre-tighten cap screws.
ti7811c
140
197
196
79