Graco G3 Series, Инструкция по эксплуатации

Страница: 43 / 76

Operation / Data Log
332305B 43
Common Functional Summary Data entries are listed
below.
Number of Cycles The number of lubrication cycles
the unit has started.
Total Run Hours Total amount of hours the pump
has been in the ON mode of the
ON/OFF cycle.
Total Powered On Hours Total number of hours that the
unit has been powered on.
Local Manual Run The number of times the manual
run button was pressed.
Remote Manual Run The number of times the remote
manual run button was pressed.
Average Run Time The average amount of time per
lubrication cycle that the pump
has been running (MM:SS).
Average Cycle 1 Time The average amount of time the
unit has been operating before
the specified feedback for the
sensor input was received (prox-
imity switch counts in divider
valve systems and pressure
switch activation in injector sys-
tems).
Average Cycle 2 Time
Average Cycle 3 Time
Average Duty Cycle The average percentage of time
the unit has been pumping while
it has been powered on.
Max Duty Cycle The highest percentage of time
for one lubrication cycle that the
unit has been pumping while it
has been powered on.
Total Low Level Faults Total number of low level faults.
Total Cycle Pressure
Faults Total number of faults related to
sensor feedback in an injector or
divider valve system.
Total Other Faults Faults other than low level or
sensor feedback.
Total Fault Hours Number of hours the system has
been powered on in fault mode.
Total Low Level Warnings Number of low level warning
conditions.
Total Cycle Pressure
Warnings Total number of warning condi-
tions related to sensor feedback.
This is only applicable if fault
retries are used.
Total Other Warnings All other warnings including tem-
perature and motor current.