![background image](http://html.mh-extra.com/html/graco/g3-series/g3-series_instruction-manual_2251546035.webp)
Max Model Setup
332305B
35
•
An LED flashes under
either HH when pro-
gramming hours
OR
MM when program-
ming minutes.
•
In SETUP MODE the
number displayed in
the first field, on the
left side of display
blinks, indicating the
device is ready to pro-
gram the Backup Time hours.
•
The total amount of Backup Time must
be at least twice as long as the pro-
grammed ON Time. If a value less
than twice the ON Time is entered, the
RED alarm LED lights and the value must be
updated.
If this time does not meet the application needs,
contact Graco Customer Support.
Programming Backup Time
NOTE:
When programming a Backup Time of
less than
10 hours
you
must
program a leading zero in the first
number field and press the ENTER button to save the
zero selection.
1. To set the Backup Time use
the UP or DOWN ARROW
button to scroll through
numerals 0 to 9 until the
desired number appears in
the first HH (hour) field.
2. Press the ENTER button to lock in the
selection. The next HH number field to
the right flashes indicating it is ready for
programming.
3. Use the UP or DOWN
ARROW button to scroll
through numerals 0 to 9 until
the desired number appears
in the second HH number
field.
4. Press the ENTER button to lock in the
selection.
The next number field to the right
flashes and the LED lights under MM; indicating it is
ready to program the minutes fields.
5. Repeat steps 1 - 4 to set the next MM (minutes)
fields.
6. After pressing the ENTER button to set
the last MM field, the OFF Time informa-
tion is saved.
7. After selecting ON, refer to page 32.
NOTE: Backup time can be set in HH:MM for the
machine count input.
OFF Time
•
The LED next to the clock in the OFF
field lights, indicating you are setting
the OFF Time parameters.
•
OFF Time is set in Hours and Minutes
(HH: MM).
•
An LED flashes under
either HH when pro-
gramming hours
OR
MM when program-
ming minutes.
•
In SETUP MODE the
number displayed in
the first field, on the
left side of display
blinks, indicating the
device is ready to pro-
gram the OFF Time hours.
•
The total amount of OFF Time must be
at least twice as long as the pro-
grammed ON Time. If a value less
than twice the ON Time is entered, the
RED alarm LED lights and the value must be
updated.
If this time does not meet the application needs,
contact Graco Customer Support.
Programming OFF Time
NOTE:
When programming a time of
less than 10
hours
you
must
program a leading zero in the first
number field and press the ENTER button to save the
zero selection.
OR
OR
Содержание G3 Series
Страница 27: ...Quick Setup Guide 332305B 27 Quick Setup Guide 8 8 8 8 8 8 8 B 8 8 D 8 ...
Страница 75: ...Notes 332305B 75 Notes ...