Installation
8
334222B
Attach the Light Tower
(Optional)
1. Attach the light tower to the DM bracket.
2. Connect the light tower to the red labeled connector
on the D-Sub harness.
Attach the Customer Signal
Module Kit (Optional)
1. Attach the customer signal module to an accessible
location.
2. Using 18 gauge wire or smaller, connect the M12
connector terminals to the module.
3. Connect the M12 connector to the green labeled
connector on the D-Sub harness.
4. Connect the customer provided user interface to the
appropriate terminals of the module.
Table 1: Light Tower Signals
Signal
Description
Yellow flashing
A low priority error exists.
Yellow on
A medium priority error exists.
Red flashing
A high priority error exists.
Red on
The system is shut down due to
error conditions.
M12 Pin
No.
Connects to
Module
Terminal No.
Function
1
---
---
2
2
Cycle Counter Output
3
3
VDC Common
4
4
Drum Low Output
5
5
General Fault Output
1
4
5
3
2
