Installation
3A2806A
13
Install Light Tower
NOTE:
Install the light tower in a suitable location for
clear viewing.
1.
Create the hole pattern below to match the light
tower base.
2.
Use the provided screws to attach the light tower to
the mounting bracket.
3.
Route the light tower cord as needed towards the
ADM.
4.
Connect the cable to the port labeled “1” on the
base of the ADM. Refer to F
NOTE:
A 5 m (16 ft) cable is provided with the level con-
trol kit. If extension cables are necessary, refer to GCA
CAN Cables - Reference manual.
NOTICE
To prevent damage to the cord, ensure it will not be
pinched during normal machine operation after
routing.
Ø
0.90
Ø
1.57
Bolt Circle
3x 8-32 UNC 2B
Equally Spaced
Mount Pattern
