grace design m906
owner’s manual
6
J
S/PDIF STEREO INPUT This RCA jack input accepts a S/PDIF format digital stereo signal.
K
TOSLINK STEREO INPUT This optical connector accepts a TOSLINK format digital stereo signal.
L
AES3 MULTI-CHANNEL INPUT This DB25 female connector accepts inputs from four AES3 format
digital sources. The first three AES3 inputs serve as the 5.1 digital input source (channels 1 through
6) and the remaining pair is available as the second 2 CH AES3 input (channels 7 and 8). Wired to
the Tascam DA-88 standard pinout. This connector also can provide four AES digital outputs with
the aeS Loop-thru option.
M
TB MIC INPUT This female XLR connector connects a talkback microphone to the m906 for control
room to studio communications. 48 Volt phantom power is provided.
N
5.1 UNBALANCED ANALOG INPUTS These six RCA jacks are used to input an unbalanced (–10dBV)
5.1 source into the m906.
O
REMOTE CONNECTOR This female DB15 (high density) connector allows connection between the
m906 Audio Control Unit and the remote control unit via the supplied remote cable.
P
TB SW JACK This ¼” TRS talkback switch jack is for connecting an external switch used to remotely
activate the talkback microphone function.
Q
CR OUT 1 and CR OUT 2 Analog, balanced stereo outputs for stereo control room output sets #1
and #2. These connections are wired in parallel with the left and right outputs of the correspond-
ing 5.1 DB-25 control room outputs.
R
CUE OUT LEFT AND RIGHT An analog balanced stereo output for the CUE input signal. The talk-
back microphone signal is summed into this output. This output can also be configured to serve as
a third stereo control room output pair.
S
CUE IN LEFT AND RIGHT This input is for connecting a stereo cue signal to the m906, which can be
routed to the stereo cue outputs for studio talent monitoring and can be monitored directly in the
control room.
T
2 CH 1 and 2 CH 2 INPUT These are balanced analog stereo XLR inputs.
U
5.1 BALANCED ANALOG INPUTS This DB25 female connector accepts analog balanced (+4dBu)
signals for use as a 5.1 source input.
