Rev. A 92149901
10
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Application:
This pump is specifically designed for use with methanol
and ethanol. The pump is also compatible with gasoline,
diesel fuel (up to 20% biodiesel blends such as B20) and
kerosene. Pump is designed for permanent mounting on
vented storage tanks.
RAINPROOF
for outdoor use.
Pump Housing:
Lightweight, corrosion-resistant, nickel plated, cast
aluminum body, convenient union ring for easy
installation.
Performance:
Pump Rate:
Up to 12 GPM (45 LPM)
Duty Cycle:
30 min. ON, 30 min. OFF
Suction Lift:
Manual Nozzle:
Up to 5.5 ft. (1.7 m)
Automatic Nozzle: Up to 4.8 ft. (1.5 m)
Operating Temperature:
-20°F to +125°F (-29°C to +52°C)
Operating Pressure:
15 PSI
Electrical Specifications:
Input:
120 volt AC
Motor:
1400 RPM, 1/8 HP (93 Watts)
Motor Approval:
UL Listed
Motor Protection:
2.5 amp circuit breaker and auxillary temperature limiting
device.
Mechanical Connections:
Bung:
2 in. NPT
Inlet:
1 in. NPT
Outlet:
3/4 in. NPT
Weight:
Shipping:
15 lbs. (6.8kg)
PARTS AND SERVICE
In order to preserve the UL Listing for the motor, do
not attempt to service the motor. For products serviced
outside the factory, the UL nameplate must be defaced
to indicate that the equipment may no longer meet the
requirements for UL Listing. This does not apply to prod-
ucts serviced outside the factory under the UL program
for Rebuilt Motors for Use in Hazardous Locations.
For warranty consideration, parts, or other service in-
formation, please contact your local distributor. If you
need further assistance, contact the GPI Customer
Service Department in Wichita, Kansas, during normal
business hours.
A toll free number is provided for your convenience.
1-800-835-0113
To obtain prompt, efficient service, always be prepared
with the following information:
1. The model number of your pump.
2. The serial number or manufacturing date code of
your pump.
3. Part descriptions and numbers.
Part information can be obtained from the Illustrated
Parts List.
For warranty work, always be prepared with your original
sales slip or other evidence of purchase date.
Please contact GPI before returning any parts. It may
be possible to diagnose the trouble and identify needed
parts in a telephone call. GPI can also inform you of any
special requirements you will need to follow for shipping
fuel dispensing equipment.
Do not return the pump or parts without authority from the
Customer Service Department. Due to strict government
regulations, GPI cannot accept parts unless they have been
drained and cleaned.
CAUTION
Содержание M-1115S
Страница 11: ......
