HOME FITNESS | Remise en forme à domicile
TRAMPOLINE
6. Slide the SAFETY PAD (6) over the rails of the frame. Make sure the holes in the SAFETY PAD (6) fit over the
threaded leg connectors properly this is on the bottom of the trampoline as shown in the illustration below.
Note: THE SAFETY PAD (6) must also cover the springs around the MAT (5) as shown in the illustration below.
7. Remove the black caps that cover the leg holes. (It is the small threaded pieces that extends from the frame.)
8. Tightly screw the legs into the designated holes with the leg connectors, as shown in the illustration below.
9. Turn the trampoline the right side up. Stand on the trampoline to ensure that the legs stand secure and flat
on the floor.
A) Install the SAFETY PAD (6) on this
threaded connector
B) Install the SAFETY PAD (6) on this
threaded connector
CAUTION:
The SAFETY PAD (6) must be securely
attached to the frame before using the
trampoline.