7
The scale needs to be initialized before first use and after battery replacement
. Press firmly on
the scale platform. The display will show a running zeros pattern and automatically turn off.
Your scale is now ready for use.
Press firmly to initialize
WEIGHT-ONLY OPERATION
Your
GoWISE USA
Digital Body Fat Scale will operate as a conventional weight-reading scale. No
special programming steps are required.
Once the scale is initialized, as previously described, you may simply
step on
the scale to
measure your current weight. For only weight reading:
1. Position the scale on a flat hard surface. Carpeted
or uneven floors may affect accuracy.
2. Step onto the scale platform and remain still while
the scale computes your weight.
3. The scale will save your weight.
4. The scale will automatically turn off after 5 seconds.
USING YOUR BODY FAT SCALE
N
ormal
H
i gh
In order to measure body fat and body mass index, you must first enter your height, age and
gender (in athlete mode if applicable). The scale uses these parameters to calculate your
measurements. Screen prompts will lead you through programming your personal information
into the scale. The scale will then use the data to compute your measurement results.
NOTE:
Athlete mode uses additional software to calculate more accurate results for highly fit
individuals—persons who do 10 hours or more per week of aerobic activity and have a resting
heart rate of 60 beats per minute. The scale is not calibrated for professional athletes or body
builders.
Bare feet are required for the analyzer to function properly:
Remove your shoes and socks before beginning the measurement. In order to
get the
most
accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly damp
before stepping onto the scale.