8
REMINDER:
The scale needs to be initialized after battery installation. The scale may also need
to be initialized if it is moved or bumped.
At all other times, you may directly proceed with the
following instructions for programming your personal data into the scale.
To initialize the
scale, simply press firmly on the scale platform. The display will show “0.0” and automatically
turn off. Your scale is now ready for use.
NOTE:
The illustrations in this manual are guides only. The display on your scale may differ
slightly.
HOW TO ENTER PERSONAL DATA
This scale will store personal data for 8 users in the memory (P1-P8). Select a number (1
through 8) and use this number to enter your height, age, gender, and activity level; the scale
will then use these parameters to calculate your results.
Adding personal information into memory, before the first use, eliminates the need to enter it
again each time you take a reading.
1. Press “SET” to turn the scale on.
2.
Press( ) or(
) button to select a memory number. Press the SET button
confirm. The gender/athlete mode blinks.
3. Press( ) or(
) button to toggle between the male /female / male athlete /
female athlete icons. Press SET button to confirm your gender/athlete selection.
The height digits blink.
4. Press( ) or(
) button to increase / decrease the height value. Press the SET
button to confirm displayed height. The age digits blink.
