3 Development Board Circuit
3.1 FPGA Module
DBUG388-1.0E
9(22)
3
Development Board Circuit
3.1
FPGA Module
Overview
For the resources of GW1NSR series of FPGA Products, please refer
DS861, GW1NSR series of FPGA products
For the resources of GW1NSER series of FPGA Products, please refer
DS881, GW1NSER series of SecureFPGA Products Data Sheet
I/O BANK Introduction
For the I/O BANK information and package and pinout information,
UG861, GW1NSR series of FPGA Products Package and
, and
UG884, GW1NSER series of FPGA Products
Package and Pinout User Guide.
3.2
Download & Debug
3.2.1
Overview
The development board provides a USB interface and a J-Link
interface. The .fs file can be downloaded to the internal SRAM or internal
FLASH as needed.
Note!
When downloaded to SRAM, the data stream file will be lost if the device is powered
down, and it will need to be downloaded again after power-on.
If downloaded to flash, the data stream file will not be lost if the device is powered
down.