(advances one step, every time a note-on is received), Play (the play/enter knob starts and stops the
modulator) and MIDI (synced to MIDI-clock). It has 2 sets of settings, the ”normal” settings and the
”b” settings, that can be morphed between, using any modulator.
It also has a second stepped output to the modulation bus: Every time modulator 1 reaches a new
step/value this is updated. This can also be set up to put out note and gate values, and used as a
morphable step-sequencer.
Edit 1 – Modulator 1 trigger mode:
Values:
-Off:
Modulator 1 is running continiously and looped.
-Krst:
Single triggered key reset. When a note on are received, and no other notes are held,
modulator 1 will reset to step 1 and thereafter loop. If other keys are held, when receiving a note on,
it will not reset.
-Ktrg:
Multi triggered key reset. Every time a note on are received, modulator 1 will reset to step 1.
-Keyd:
Every time a note on are received, it will advance one step, and loop that single step, until
the next note on are received.
-Play:
When the Play/Enter/Freeze knob are pushed, so it is lit, modulator 1 will reset to step 1 and
thereafter continiously loop, until the Play/Enter/freeze knob are pushed again. Then it will stop.
-Midi:
When a MIDI start command are received, modulator 1 will reset to step 1 and thereafter
loop continiously, synced to MIDI clock, until a MIDI stop command are received. In this mode it
can also be started and stopped by pushing the Play/Enter/Freeze knob, as long as a MIDI clock are
present.
Edit 2 – MIDI clock divide:
Value: 1 to 256. A divisor that divides the MIDI clock used if trigger
mode = Midi.
Encoder – Stepped modulator 1 note output:
Value: Off/On. If this is on, the stepped output of
modulator 1 will send note values to the 2 oscillators and key triggers to the envelopes, modulator
2, the LFO’s and random. Kind of like an analogue sequencer with a few differences.
1 Trig. Cdiv. Note
X Off 12 Off