Gorilla Playsets Riverview, Инструкция по сборке

Страница: 42 / 94

Step 10: Deck Boards
The following step is recommended to prevent possible splits in the wood.
1: Pre-drill the ends of the deck boards to prevent installation damage. Pre-drill both
ends with a 1/8” drill bit at the dimensions shown below.
2: Start with a 5/4 x 6 x 47-1/2” deck board at one end of the fort. Center the board
between the front face board and the rear bottom panel board and attach it with 2” wood
screws through the pre-drilled holes and into the deck support shown below. Leave a
uniform ( approx. 1/4”) space between the deck boards. Note: the top of the screw head
should be flush to the top of the deck boards.
Lay all deck boards across the deck supports before securing them to the fort. This will
ensure that you have equal spacing across the deck.
1-3/8”
2-3/4”
1-3/8”
4-1/8”
23-11/16”
1”
5/4 x 6 x 47-1/2”
Deck Spacer
2” wood Screw.
5/4 x 6 x 47-1/2
Deck Board
4-1/8”
4-1/4”
0-1/8”
Page 42
®