Gorilla Playsets Riverview, Инструкция по сборке

Страница: 40 / 94

Step 8: Deck Spacers
The following step is recommended to prevent possible splits in the wood.
1: Pre-drill the ends of the 5/4 x 4 x 40-1/2” deck spacers to prevent installation damage.
Pre-drill both ends with a 1/8” drill bit at the dimensions shown below. The hole at 20-
1/4” only needs to be drilled once. This hole is to attach the center deck support to the
deck spacer.
2: Place the 5/4 x 4 x 40-1/2” deck spacer at one end of the fort. Center the board
between the corner posts and attach it with 2” wood screws through the pre-drilled holes
and into the deck support below. Note: the top of the screw head should be flush to the
top of the deck spacer.
20-1/4”
11/16”
2-3/8”
0-1/8”
1-11/16”
1”
5/4 x 4 x 40-1/2”
Deck Spacer
This is the center of the
board. This hole only
needs to be drilled once.
2” wood Screw.
5/4 x 4 x 40-1/2
Deck Spacer
Page 40
®