Step 54: Installing the Climbing Rope
1: Drill a 7/8” hole through the end panel board (above the rock wall) for the climbing
rope.
2: Tie a knot at one end of the 10’ rope and thread it through the hole in the end panel
board.
3: You can tie a few (no more than three) knots in the rope to aid in climbing
approximately 18” apart before tying the knot behind the bottom rock wall board.
4: The untied end will go through the hole of the bottom rock wall board. Tie a secure
knot at the end making sure that the rope is tight and will not wrap around your hand.
Hint: to reduce the amount of slack in the rope, lift the rock wall assembly slightly when
tying the knot in the bottom rock wall board. When you lower the assembly, the rope will
tighten.
Page 86
®
Содержание Riverview
