Gorenje MMC800W, Инструкция по эксплуатации

Страница: 28 / 55

28
Before use
Clean all detachable parts before using the
appliance for the first time (see chapter
‘Cleaning’).
Make sure the appliance is assembled properly
(see chapter ‘General description’) before you
plug it in the wall socket.
Put the plug in the wall socket.
Using the appliance
KNEADING/BEATING/WHISKING:
(See figure A):
Depending on the nature of the ingredients, the
bowl (7) with its cover can be used to prepare
up to 2 kg of dough.
Before using for the first time, clean all parts of 1.
the accessories with soapy water rinse and dry.
Press button (2) to release the multifunction 2.
head (8) and raise it to a vertical position.
Fit the bowl(7) onto the appliance by turning 3.
until it locks in position and place the
ingredients in it ,weighting them as indicated
under the weighing function.
Position the cover on the bowl with the filling 4.
opening at the front of the appliance.
Fit the desired accessory (9), (10), (11) in the 5.
power outlet, pushing the shaft of the
accessory home and turn it a quarter towards
you to lock it in position.
Lower the multifunction head of the appliance 6.
to horizontal position and press button again
(you will hear a click).
During preparation, you can add ingredients 7.
through the opening of the cover.
To stop the appliance, turn the knob (1) back to 8.
0.
Place the appliance on a flat, clean and dry 9.
surface and then plug in your appliance.
Cleaning
Unplug the appliance. 1.
Never immerse the motor until in water or put it 2.
under running water. Wipe it with a soft dry or
slight damp cloth.
For easier cleaning, quickly rinse the 3.
accessories after use. Completely dismantle
the mixer attachment. Handle the blades with
care, as some have sharp cutting edges.
Wash , rinse and wipe the accessories or put 4.
them in the dishwasher, except for the metal
components of the mincer attachment body
Fine grinding disc(15),Medium grinding
disc(16),Worm shaft(17), Cutter blade
(18),Coarse grinding disc (19) and Screw
ring(20).
The grinding disc and the blade must be kept 5.
lubricated. Wipe them with cooking oil after
each use.
If your accessories change color because of 6.
the food (carrots, oranges etc), rub them gently
with kitchen towel dipped in cooking oil and
then clean it in the usual way.
CAUTION:
Don
’t wash the pasta attachment in the
dishwasher, wipe them clean with a damp
cloth. Do not immerse in water.
OPTIONAL ATTACHMENTS:
* »
NOTE
: Accessories are sold separately«
Cutter housing A 12.
Tray 13.
Pusher A 14.
Fine grinding disc 15.
Medium grinding disc 16.
Worm shaft 17.
Cutter blade 18.
Coarse grinding disc 19.
Screw ring 20.
Separator 21.
Sausage horn 22.
Former 23.
Cone 24.
Pusher B 25.
Slice cutter 26.
Cutter housing B 27.
Coarse bar cutter 28.
Fine bar cutter 29.
Flat pasta roller 30.
Spaghetti pasta cutter 31.
Tagliatelle pasta cutter 32.
MEAT GRINDER
Assembling the meat grinder or making
sausages attachment (See figure B).
Take the body (Cutter housing 12) by the feed 1.
tube with the largest opening upwards.
Insert the worm shaft (17) in the cutter housing 2.
(12). Fit the cutter blade (18) on the shaft with
the cutting edges upwards.
Place the selected hole-plate over the blades 3.
and make sure that the two lugs fit in the two
cut-outs in the body.
Screw the ring (20) cap nut fully on the body. 4.
Check the assembly. The shaft should not turn 5.
on itself.
Put the multifunction head in the horizontal 6.
position (you will hear a click).
Offer up the assembled mincer attachment, 7.
titled towards you, to the outlet and engage it