Instructions for use and installation
17
Electrical connections
Electric connection may be carried out by
qualified service personnel only!
Wrong connection may permanently damage parts
of the appliance and render your warranty void!
Mains voltage of the user (230 V) must be verified with the
measuring device!
Threeseparating switches should be placed in accordance with
the mains connection.
•
Before attempting the connection, check whether the voltage
indicated on the rating plate corresponds to the actual mains
voltage.
•
Mains lead behind the cooker must be placed in such
manner to avoid touching the back panel of the cooker
because of the heat it develops during operation.
•
The connection may be carried out by rubber mains lead
(type HO5RR-F with green/yellow earth wire), PVC insulated
mains lead (type HO5VV-F with green/yellow earth wire) or
other cables of equal or better quality.
•
The mains lead extension may be made by qualified
personnel only.
•
Repairs of electrical parts may be carried out only by
qualified electrician. In case of malfunction call the service
center.
Technical specifications
Type
P41A2-22NTD
Dimensions:
height/width/depth (cm)
85/60/60
Oven
D
= Triple-ring burner
B
= large burner
A
= normal burner
H
= auxiliary burner
Oven gas burner (kW)
3,5
Infrared gas burner (kW)
2,7
Electric infrared burner (kW)
-
Guide levels
5
Oven illumination (W)
25
Cooking zone
burners*
rear left
1,9/A
front left
1,9/A
front right
3,0/B
rear right
1,0/H
Total burners (kW)
7,8
Total mains power (kW)
11,3
Total mains power (g/h)
822
Gas mains connecton (right)
ISO 7-R1/2
Gas specifications are indicated on the label adjacent to the rating plate
Nominal voltage
AC 230, 50Hz
Nominal current (A)
-
Electric power (W)
30
Class of the appliance
2/1
Group
GB,IE,GR
= II2H3+
Empty oven reaches 200°C in 9 minutes with the oven burner in operation.
*Burner capacity is calculated for the higher caloric value Hs of gas.
Rating plate
Rating plate is located at the bottom on the side when you
open the oven door.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE
OPERATION OF THE APPLIANCE.
