Gorenje GDV642X A, Руководство по эксплуатации

Страница: 20 / 32

Action Possible causes Problem
Check that the salt compartment
lid is properly tightened. Other-
wise call the service division. The water softener is leaking salt. Spots or films on the dishes.
See the section Settings. Incorrect water softener setting.
See the sections Before washing
for the first time and Settings. Incorrect rinse aid dosage setting.
Top up with salt. See the section
Before washing for the first time. Salt compartment empty.
Wash crystal at a low temperat-
ure and with a conservative
amount of detergent. Contact the
detergent manufacturer. Too high temperature and/or too
much detergent can cause etching
on crystal. Unfortunately, this
cannot be repaired, only preven-
ted.
Reduce the amount. See the sec-
tions Before washing for the first
time and Settings. If you have very
soft water, you may want to dilute
the rinse aid 50:50 with water. Rinse aid dosage setting too high. The dishes have a sticky
white/blue film.
Rinse off these types of foodstuffs
if not starting the dishwasher im-
mediately. Why not use the Rinse
& Hold programme. Some foodstuffs, such as mustard,
mayonnaise, lemon, vinegar, salt
and dressings, can mark stainless
steel if left for too long. Spots on stainless steel or silver.
Silver and stainless steel items
should not come into contact
during dishwashing. All stainless steel can cause spots
on silver if they come into contact
during dishwashing. Aluminium
can also cause spots on dishes.
Use a detergent with a bleaching
agent. Lipstick and tea can be difficult to
wash off. Spots left after washing.
Check that the dishes are placed
securely. Spin the spray arms to
make sure they can rotate. The dishes are not correctly
placed or the spray arms are not
rotating. Rattling sound when dishwashing.
20