Gorenje GDV642X A, Руководство по эксплуатации

Страница: 26 / 32

SETUP
• The recess and connection dimensions are
included in the separate installation
instructions. Check that all dimensions are
correct before starting the installation.
• Make sure the area on which the dishwasher
is to be installed is firm. Adjust the adjustable
feet so that the dishwasher is level. Tighten
the lock nuts.
DRAINAGE CONNECTION
See the separate installation instructions for all
necessary information.
This dishwasher is suitable for installing in a raised
recess (to attain an ergonomic working height).
This means that the dishwasher can be placed so
that the drainage hose runs to a lower level than
the bottom of the dishwasher, such as by routing
it directly to a floor drain. The dishwasher is fitted
with an integrated anti-siphon device to prevent
the machine from being emptied of water during
the wash cycle.
The drainage hose can also be connected to a
connection nipple on the sink unit's water trap.
The connection nipple must have an internal
diameter of at least 14 mm.
The drainage hose may be extended by a
maximum of 3 m (the total length of the drainage
hose must not exceed 4.5 m). Any joins and
connecting pipes must have an internal diameter
of at least 14 mm. However, the drainage hose
should ideally be replaced with a new hose
without joins.
No part of the drainage hose may be more than
950 mm above the bottom of the dishwasher.
Ensure that the drainage hose has no kinks.
CONNECTION TO WATER SUPPLY
Use only the supply hose provided with the
dishwasher. Do not re-use old hoses or other
spare supply hoses.
The supply pipe must be fitted with a stopcock.
The stopcock must be easily accessible, so that
the water can be shut off if the dishwasher has
to be moved.
Once the installation is complete, the stopcock
should be opened to allow the pressure to settle
for a while and to check that all connections are
tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or
geothermal power to heat your home. Choosing
a hot water connection cuts programme times
and reduces the dishwasher's electricity
consumption.
ELECTRICAL CONNECTION
Information about the electrical connection can
be found on the serial number plate This
specification must match the electricity supply.
Dishwashers fitted with a plug must be connected
to an earthed socket.
The electric wall socket must be placed outside
of the installation area to be easily accessible after
installing the dishwasher. Do not use an extension
cord!
NOTE!
Repairs and maintenance relating to safety or
performance must be carried out by a qualified
professional.
26