TROUBLESHOOTING
Action
Type of fault
Display
Call the service division.
Overfilling
See "Water remains in the dishwasher"
in the table below.
Water outlet fault
Check that the water tap is on.
Water inlet fault
Turn off the water tap and call the ser-
vice division.
Inlet valve leakage
Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error
message from the display.
Action
Possible causes
Problem
Remove the arms and clean them.
The spray arms do not rotate.
The dishes are not clean.
Check that the dishes are not
blocking the spray arms.
Avoid large packages.
Old detergent. Detergent is a
perishable product.
Dose according to water hard-
ness. Far too much or far too little
detergent results in poorer dish-
washing results.
Incorrect detergent dosage.
Select a higher temperature or a
more powerful programme.
Dishwashing programme too
weak.
Do not cover porcelain with large
bowls or the like. Avoid placing
very tall glasses in the corners of
the baskets.
Dishes loaded incorrectly.
Place dishes to sit steady.
Glasses and cups have toppled
over during the programme.
Screw the filter firmly into place.
See the section Care and cleaning.
The filter is not correctly fitted.
19
Содержание GDV642X A
Страница 1: ...Operating Instructions GDV642X A GDV642XLA...
Страница 29: ...YOUR NOTES 29...
Страница 30: ...YOUR NOTES 30...
Страница 32: ...Art No 701744 Rev 02 We reserve the right to make changes en 12 14...