Goodmans Micro 1990 DVDF, Инструкция по эксплуатации

Страница: 55 / 64

51
11.5. Programme Reminders And Timers
With the greatly extended channel choice that digital terrestrial television brings, it
is all too easy to miss a favourite programme. The
DVB-T receiver has two
facilities built in to help you make sure you catch all the TV shows you want.
11.5.1. Programme Reminders
Programme reminders can be set to signal that a programme is about to start
when you are watching another channel. A reminder is set from the Electronic
Programme Guide screen.
Press the [GUIDE] key to display the EPG screen and press [RIGHT] to display
the next programme details in the text window and highlight the name of the next
programme in the list of channels. Press [SELECT] when a programme you want
to watch is highlighted and the reminder icon is displayed against that
programme's name.
You can exit the EPG screen in the normal way - pressing [GUIDE], [MENU].
Later, shortly before the programme is due to start, the receiver will display a
reminder on the screen over the picture of the channel being viewed.
Use the [LEFT] or [RIGHT] keys to highlight the YES or NO buttons as appropriate
and press [SELECT]. If you select the YES button, the receiver switches over to
the reminder channel.
Note:
Reminder events are ignored if any timer event is active at that time.
11.5.2. Event Timer
You can also set a timer to switch the receiver to any channel without your
intervention. This is intended for making video recordings of programmes when
you are out. If a single programme is to be recorded, the receiver can be left
switched to the required channel and the timer set on the VCR. However, if two or
more programmes on different channels are to be recorded then the DVB-T
receiver's own timer is set as well, to select the required channel when it is
needed.
Display the Main Menu by pressing the [MENU] key and highlight and select the
Timers line to display the Timer menu screen. Up to five separate timer events
can be set and each is displayed in the Timer screen, showing the event number,
the channel to be selected, the start time, end time, date and the mode - whether
that event is active (and will be acted on) or not.
11. DVB-T Advanced operation