Goodmans Micro 1990 DVDF, Инструкция по эксплуатации

Страница: 59 / 64

55
POWER
The Micro system should be plugged into a 230V to 240V AC, 50Hz supply only.
LEADS
Ensure the power supply lead, and all other leads, are positioned so they are not
likely to be walked on or pinched by things placed on or against them. Pay
particular attention to the power lead, where it enters the mains plug and where it
comes out of the receiver. Do not connect or adjust leads when the receiver is
plugged in.
TEMPERATURE AND MOISTURE
Do not leave or use the receiver in a hot, cold or humid area. Do not allow the
receiver to get wet - from drips or splashes - as this may be dangerous. Do not
place water-filled objects such as flower vases, on top of the receiver.
VENTILATION
Slots and openings in the receiver's cover are for ventilation. Do not cover or block
them as this could lead to overheating.
CLEANING
Unplug the receiver before it is cleaned. Use a lightly dampened cloth only. Do not
use liquid or aerosol cleaners.
HEAT AND FLAMES
The receiver should not be placed near to naked flames or sources of intense
heat, such as an electric fire. Ensure that no naked flames sources, such as
lighted candles, are placed on top of the Receiver.
LIGHTNING
Unplug your receiver from the wall socket if there is a storm or lightning, or if it is
to be unused for a long time.
REPLACEMENT PARTS
If your receiver needs a replacement part, ensure the person undertaking the
repair uses parts which are specified by the manufacturer or have the same
specifications as the original part. Other parts may cause a fire, electric shock or
other hazards.
BATTERY DISPOSAL
Please ensure that exhausted batteries from the remote control handset are
disposed of safely.
SERVICING
Ensure the person who services your Micro System is qualified to do so. Do not
remove the cover yourself - you could get an electric shock. We are proud to offer
a high-quality product. To keep this level of quality, your receiver should be
serviced at a Goodmans authorised service centre.
12. Safety