Goodmans Micro 1990 DVDF, Инструкция по эксплуатации

Страница: 40 / 64

36
First you should select the type of TV set you have connected to the DVB-T
receiver. Press the [LEFT] or [RIGHT] keys on the remote control handset to
switch the indicator on the screen to show either 16:9, if you have a 16:9 or
'widescreen' TV, or to 4:3 if you have a standard TV set. Then press [SELECT] to
start the installation process. The next menu will ask if you want to tune in the
digital terrestrial television channels.
Using the [LEFT] or [RIGHT] keys on the remote control, make sure that the YES
button is highlighted in yellow, and press the [SELECT] key to start the automatic
search. The DVB-T receiver will automatically tune to the UHF transmission
channels 21 to 68 looking for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about five minutes.
When the search is finished, the first channel of the channel list and the
information banner is displayed you can now watch digital terrestrial television,
selecting the channel you require as described in the next section.
HINT : Depending on the reception conditions in your particular area, you may find that the list of
channels found includes one or more repeated names. This is because the receiver may detect
and store some channels, including those it cannot receive clearly, from adjacent areas
alongside the strong channels from a transmitter nearby. This is not a problem and the weaker
channels can be deleted from the receiver later, as described in Section 11 – DVB-T Advanced
Operation -Editing the channel list.
If no digital terrestrial television broadcasts are found the receiver will display a
message:
You should then refer to the Troubleshooter Guide in 14th CHAPTER to establish
the cause of the problem.
When you have finished watching digital terrestrial TV, you may wish to switch the
receiver to standby to save power - although the DVB-T receiver can remain
powered up continuously, even when the television is turned off, without harm to
the television or itself. The receiver is returned to standby by pressing the
[STANDBY] key on the remote control handset.
Hint: In standby, the DVB-T receiver still consumes power and thereby contributes to air and
water pollution and the exhaustion of the World's natural resources. Overnight or when your
receiver is not going to be used for long periods of time, you can turn it off at the mains and this
will save energy (and save you money). You will not have to re-install the receiver when it is
turned on again.
Do You want to start automatic search?
Yes No
9. DVB-T Preparation 9. DVB-T Preparation 9. DVB-T Preparation