Goodmans Micro 1990 DVDF, Инструкция по эксплуатации

Страница: 52 / 64

48
The channel lock is applied with the Channel List menu. Press the [MENU] key on
there mote control handset to display the Main Menu and then, using the [UP] or
[DOWN] keys on the remote control, make sure that the first item, Channel List, is
highlighted in yellow and press the [SELECT] key.
Highlight the channel to be locked using the [UP] or [DOWN] keys. You can move
through the list 10 channels in one jump using [RED(PAGE UP)] or
[GREEN(PAGE DOWN)]. Now select the LOCK button at the base of the screen
with the [LEFT] or [RIGHT] keys and press [SELECT].
A window requesting the PIN code is displayed and the four-digit code should be
entered using the number keys on the remote control, followed by the [SELECT]
key. A lock icon is then displayed alongside the channel name in the channel list.
Hint:
The PIN is factory set to 0000. This code should be reset (as described below) to
another sequence of numbers, known only to you, when you have finished setting up the
receiver.
You can now leave the Channel List screen and return to normal TV viewing by
pressing [MENU]. Any attempt to change channel to the locked channel will now
display the same window requesting the PIN code and the channel will only be
displayed on entry of the correct code. To remove the lock on a channel, repeat
the same process as to lock the channel.
11.3.2. Menu Lock
Simply locking a channel will not deflect a determined would-be viewer. Re-
installing the complete channel list, for example, will bypass the channel lock.
However, the menu scan be locked out of use too, to prevent this.
Display the Main Menu by pressing the [MENU] key, highlight Configuration, and
press [SELECT] to display the Configuration menu screen. Highlight the Parental
Settings line of the menu (press [DOWN] five times) and press [SELECT] to
display the Parental Settings menu (after the PIN code has been entered). Here
the menu lock-out can beset and the PIN code changed.
With the Menu Lock line highlighted, use the [LEFT] or [RIGHT] to cycle the menu
lock setting through Disabled, Main Menu and Installation. The Main Menu setting
will lockout the complete menu system; the Installation Menu setting locks only the
Installation menu (see
Section 11 – DVB-T Advanced operation -
Re-installation); and
the Disabled setting allows free access to any of the menus.
11. DVB-T Advanced operation