Goodmans GMC 1034DAB, Инструкция по эксплуатации

Страница: 10 / 18

When the system is connected to the power for the
first time, it will be in Standby, the display will first
show the greetings and then the clock. Press the
STANDBY button once will turn the system ON, the
DAB mode will be automatically selected and
perform auto tune full scan function. (F1) (F.2) (F.3)
When the system is first power up, the system will automatically enter into the DAB mode and perform
DAB auto tune quick scan function, the display will show a slide bar to indicate the progress of the
scan. Unlike normal radio, the separate signals from a number of stations are grouped together and
transmitted in a single frequency; these groups are referred to as multiplexes and ensembles. Every
time one of these groups has been found, the name of that group will be displayed on the bottom half
of the display.
There are two types of auto tune modes, one is quick scan and the other is full scan. Quick scan will only
search for the UK DAB Band III channels and full scan will search all DAB Band III channels. Once the
scan has finished, the radio will select the first alphanumerically found station.
1. To activate the quick scan, press the AUTOTUNE button once, the display will show "Autotune Quick
scan" and then a progressing slide bar and "Searching..." (F.4)
To 2. activate full scan, press and hold the AUTOTUNE button until the display shows "Autotune Full
scan". (F.5)
3. To explore the stations that have been found, press the SEL or SEL button.
DAB MODE
Auto tune modes
F1
F5 F4
F3
This unit carries a lead wire DAB antenna, to obtain the best performance, you should fully extend the
wire antenna and adjust the position as well as the direction until you find the best reception. For ideal
DAB reception, always maintain the lead wire antenna in a vertical position (holding it upward or
downward behind the unit) is highly recommended.
Hints for better reception
10. SWITCHING YOUR RADIO ON FOR THE FIRST TIME
11. LISTENING TO YOUR RADIO
F2
7