Goodmans GMC 1034DAB, Инструкция по эксплуатации

Страница: 14 / 18

1. Press the RANDOM button on the remote to
select random play, "Random" will appear in the
display. (F.20)
2. Press the PLAY/PAUSE button to start random
play, the tracks will be started playing randomly.
3. To cancel random play, press the RANDOM
button again until the "Random" off.
Random play (remote control only)
In CD stop mode, a maximum number of 20 tracks can be programmed to play in any desired order.
1. Load your disc as usual and wait until the display shows the total number of tracks on the disc and
time.
2. Press the SELECT button, the display will show "PROGRAM -01" and "Track 01". (F.21)
3. Press the SKIP/SEARCH FF or SKIP/SEARCH FR buttons to select the first track to be programmed.
4. When the desired track appears on the display, press the SELECT button, the first track to play is
programmed. The program memory number will advance to "PROGRAM -02" and the track number
will reset to "Track 00" and ready for the next entry. (F.22)
5. Repeat step 3 & 4 to program other tracks for program play.
6. When you have completed programming the desired tracks, press the PLAY/PAUSE button to begin
program play. The display will show “PROG". Playback will begin on the first track you programmed
and will continue until the last programmed track has played.
7. To erase the program, in CD stop mode, press the STOP button once; in CD play mode, press the
STOP button twice, the "PROG" will disappear.
Program play
This function allows you to program the radio to switch off itself after a set period of time. You can set your
sleep time in power on mode.
1. To activate the sleep function, press the SLEEP button on the remote control, the display will show
"SLEEP 90 mins" (F.23)
2. Repeatedly press the SLEEP button, the time will change in the below sequence on every press:
90 > 60 >30 > 10 > OFF > 90 > 60 > ......90.
3. When the display shows your desired sleep time, release the button, the sleep setting will be
confirmed in 2 seconds. The display will show "SLEEP Confirmed" and then "SLP" will show to
indicate that the sleep time is set. (F.24)
4. To cancel sleep, press the SLEEP button until the "SLP" disappears.
F24 F23
F20
F22 F21
16. SLEEP FUNCTION(remote control only)
11