Goodmans GMC 1034DAB, Инструкция по эксплуатации

Страница: 11 / 18

Ma nual tuning
F6 F7
1. To select manual tuning, press and hold the SELECT button until the display shows "Manual tune".
(F.6)
2. Press the SEL or SEL button to move through the DAB channels, on the top half of the display will
show "5A" to "13F" and their associated frequencies. When your radio locates a station group
(ensemble/multiplex) on one of the DAB channels, the name of the station group will appear on the
bottom half of the display. (F.7)
3. To enter the ensemble/multiplex, press the SELECT button, the top half of the display will show the
first station in the ensemble/multiplex.
4. Press the SEL or SEL button to see what stations are present on the found ensemble/multiplex,
when you have located your desired station, press the SELECT button, and at the same time, you
will exit from the manual tuning mode.
Autoselect on/off
F8 F9
You can explore the found stations by pressing the SEL or SEL button, if the auto select is "ON", the
station will be automatically selected when the button is released, and the name of the station will be
displayed. If the auto select is 'OFF", you have to press the SELECT button to switch to that station
when the display shows your desired station, otherwise it will revert back to the original station after 4
seconds.
To toggle between the auto select "ON" and "OFF", press the SEL or SEL button and then quickly
press and hold the SELECT button until the display shows the "Autoselect ON" or "Autoselect OFF".
(F.8) (F.9)
You can store up to 10 stations to the favourite presets; this will enable you to get direct access to your
favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the PRESETS button
until the display shows "PRESET #". (F.10)
2. Press the SEL or SEL button to select your desired station preset number.
3. Press the PRESETS to confirm your selection, the display will show "PRESET # Stored" (F.11)
4. To recall a preset station, press the PRESETS button once, then press the SEL or SEL button to
select the stations that you have stored. The display will show "PRESET # Loaded". If the preset
hasn't been allocated a station, the display will show "PRESET # empty". (F.12) (F.13)
F13 F12
F11 F10
12. STORING AND RECALLING STORED STATIONS
8